SPL
111 dB
Potencia del amplificador
150 W Bass (Class D) + 120 W Midrange (Class D) + 90 W Treble (Class AB)
Respuesta en frecuencia
32 Hz - 35 kHz ("-6 dB")
Precisión de la respuesta en frecuencia
± 1.5 dB (38 Hz - 20 kHz)
Dimensiones del altavoz
⌀ 19 mm Treble + ⌀ 120 mm Midrange + 2 x H 100 x W 215 mm Bass (ver en pulgadas)
Dimensiones
H 452 x W 286 x D 278 mm, con Iso-Pod™ (ver en pulgadas)
Peso
19 kg / 41.9 lb
Conexiones
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
8351A SAM™ Studio Monitor
Especificaciones técnicas
A revolution in three-way monitor design, the 8351 boasts a unique look, a compact size and a performance that has to be heard to be believed.
Especificaciones del sistema
Respuesta en frecuencia
38 Hz - 20 kHz (± 1.5 dB)
Corte de graves -6 dB
32 Hz
Corte de agudos -6 dB
35 kHz
SPL
SPL pico Maximum peak SPL output per pair on top of console at 1 m with music material.
≥121 dB
SPL máximo a corto plazo Maximum short term sine wave SPL output at 1 m on axis in half space, averaged as specified (from 100 Hz to 3 kHz).
≥111 dB
Ruido propio
Ruido propio Self generated noise level in free field at 1 m on axis (A-weighted)
≤5 dB SPL
Peso
Peso19 kg (41.9 lb)
Dimensiones
Altura
433 mm
Altura con Iso-Pod
452 mm
Anchura
286 mm
Profundidad
278 mm
Recinto
Material del recinto
Die cast aluminium
Tipo de recinto
Reflex port
Altavoces
Tipo de altavoz
Coaxial
Coaxial aluminium dome
Diámetro
19 mm
Tipo de altavoz
Coaxial
Coaxial aluminium cone
Diámetro
120 mm
Tipo de altavoz
Racetrack
Dual oval-shaped Acoustically Concealed Woofers
Cantidad
2
Anchura
215 mm
Altura
100 mm
Directividad
Distorsión armónica
Retardo de grupo
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF
4.9 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Sección de amplificación
Amplificadores
150 W Class D
120 W Class D
90 W Class AB
Voltaje de la toma eléctrica
100, 120, 220 or 230VAC 50/60Hz according to region
Consumo de potencia
En reposo
≤20 W
A pleno rendimiento
290 W
Sección de procesado de señal
Conectores
Input Analog signal input connector XLR female (10 kOhm input load impedance).
Input XLR female (conforms to IEC 60958-4)
Output XLR male (conforms to IEC 60958-4)
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.