SPL
113 dB
Potencia del amplificador
150 W Bass (Class AB) + 120 W Midrange (Class AB) + 120 W Treble (Class AB)
Respuesta en frecuencia
23 Hz - 40 kHz ("-6 dB")
Precisión de la respuesta en frecuencia
± 1 dB (29 Hz - 20 kHz)
Dimensiones
H 593 x W 357 x D 347 mm, con Iso-Pod™ (ver en pulgadas)
Peso
27.5 kg / 60.6 lb
Conexiones
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
8260 product specifications
Especificaciones técnicas
A masterpiece of electro-acoustic design, the 8260A remains a milestone achievement in coaxial monitoring and mid-field precision.
The Genelec 8260A was in production between 2010 and 2019. It was replaced by the 8361A model.
Especificaciones del sistema
Respuesta en frecuencia
29 Hz - 20 kHz (± 1 dB)
Corte de graves -6 dB
23 Hz
Corte de agudos -6 dB
40 kHz
SPL
SPL pico Maximum peak SPL output per pair on top of console at 1 m with music material.
≥123 dB
SPL máximo a corto plazo Maximum short term sine wave SPL output at 1 m on axis in half space, averaged from 100 Hz to 3 kHz.
≥113 dB
Ruido propio
Ruido propio Self generated noise level in free field at 1 m on axis (A-weighted).
≤5 dB SPL
Peso
Peso27.5 kg (60.6 lb)
Dimensiones
Altura
570 mm
Altura con Iso-Pod
593 mm
Anchura
357 mm
Profundidad
347 mm
Recinto
Material del recinto
Die cast aluminium
Tipo de recinto
Reflex port
Directividad
Distorsión armónica
Retardo de grupo
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF
4.9 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Sección de amplificación
Amplificadores
150 W Class AB
120 W Class AB
120 W Class AB
Voltaje de la toma eléctrica
100, 120, 220 or 230VAC 50/60Hz according to region
Consumo de potencia
En reposo
≤26 W
A pleno rendimiento
330 W
Sección de procesado de señal
Conectores
Input Analog signal input connector XLR female (10 kOhm input load impedance).
Input XLR female (conforms to IEC 60958-4)
Output XLR male (conforms to IEC 60958-4)
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.