Especificaciones técnicas
SPL
104 dB
Potencia del amplificador
50 W Bass (Class D) + 50 W Treble (Class D)
Respuesta en frecuencia
45 Hz - 23 kHz ("-6 dB")
Precisión de la respuesta en frecuencia
± 1.5 dB (58 Hz - 20 kHz)
Dimensiones del altavoz
⌀ 130 mm Bass + ⌀ 19 mm Treble (ver en pulgadas)
Dimensiones
H 299 x W 189 x D 178 mm, con Iso-Pod™ (ver en pulgadas)
Peso
5.5 kg / 12.1 lb
Conexiones
1 x XLR Analog Input
1 x RJ45 AES67 Input
2 x RJ45 Control
8430A
IP SAM™ Studio Monitor
Especificaciones técnicas
The 8430A is the world’s first AoIP studio monitor, allowing reference-quality monitor performance to integrate directly into your IP workflow.
The 8430A was in production between 2016 and 2023.
Especificaciones del sistema
Respuesta en frecuencia
58 Hz - 20 kHz (± 1.5 dB)
Corte de graves -6 dB
45 Hz
Corte de agudos -6 dB
23 kHz
SPL
SPL pico Maximum peak acoustic output per pair, 1 m distance with music material.
≥110 dB
SPL máximo a corto plazo Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz.
≥104 dB
Máximo SPL a largo plazo Maximum long term RMS acoustic output in same conditions with IEC weighted noise (limited by driver unit protection circuit).
≥96 dB
Ruido propio
Ruido propio Self generated noise level in free field on axis (A-weighted).
≤5 dB SPL
Peso
Peso5.5 kg (12.1 lb)
Dimensiones
Altura
285 mm
Altura con Iso-Pod
299 mm
Anchura
189 mm
Profundidad
178 mm
Recinto
Material del recinto
Die cast aluminium
Tipo de recinto
Reflex port
Altavoces
Tipo de altavoz
Cone
Diámetro
130 mm
Tipo de altavoz
Metal dome
Diámetro
19 mm
Directividad
Distorsión armónica
> 100 Hz ≤0.5 %
Retardo de grupo
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF
2.3 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Sección de amplificación
Amplificadores
50 W Class D
Bass amplifier short term output power.
50 W Class D
Treble amplifier short term output power.
Voltaje de la toma eléctrica
100-240 VAC 50/60Hz
Consumo de potencia
Con ISS activo
≤0.5 W
En reposo
≤3 W
A pleno rendimiento
50 W
Sección de procesado de señal
Conectores
Input Analog signal input connector XLR female, balanced 10 kOhm.
Input Audio-over-IP format and input connector:
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.